CV6400 Hydro Vac

Debris Compartment:

• Tank diameter 78″ x 8′ seam to seam
• Tank capacity 8 cubes
• 78″ x 5/16″ heads
• 78″ x 5/16″ shells
• Formed tank pedestals
• liquid level indicator D/S
• 6″ Load manual valve c/w 6″ sandpipe, aluminum camlock/cap
• 4″ Load manual valve,
• Hydraulic Lift rear gate mechanism.
• All rear valves heated, and equipped with air/open- spring/close air actuators
• Separate control switches

Water Compartment:

• 5 Cubes (1100 Imp Gal)
• 20″ Manway
• Stainless steel liquid level indicator with grab handle P/S
• 2′ heated fill port c/w riser/vent pipe
• 2″ heated Drain Valve c/w butterfly valve
• 2″ heated hard pipe supply line Plumbed through wash cabinet direct to Triplex Pump c/w loop hose at end and ball valve
• 2″ heated isolation valve between debris and water tank c/w control switch at operator station

Vibrator:

• Global hydraulic vibrator assembly mounted on bottom of tank with reinforcement pads, heavy duty mounting channel and pressure relief valve.

Pressure Relief:

• One 3″ x 15 psi relief located top front of debris tank
• 2″ vacuum breakers installed on exhaust silencer

Gauges:

• Gauge assembly with tank vacuum/pressure gauge, hydraulic pressure gauges.
• Blower temperature gauge – remote mounted on D/S.

Blower Specifications:

• 5 Cubes (1100 Imp Gal)
• 20″ Manway
• Stainless steel liquid level indicator with grab handle P/S
• 2′ heated fill port c/w riser/vent pipe
• 2″ heated Drain Valve c/w butterfly valve
• 2″ heated hard pipe supply line Plumbed through wash cabinet direct to Triplex Pump c/w loop hose at end and ball valve
• 2″ heated isolation valve between debris and water tank c/w control switch at operator station
• Blower Drive:
• Transfer case drive with air shift engagement mounted in truck driveline.
• Driveline modifications as required

Primary Shut-Offs:

• Dual heavy duty internal shut-offs with 12″ S.S. float ball/cage assembly and 8″ Neoprene seats.
• Dual 8″ diameter flanged outlets.
• Dual 8″ isolation valves air actuated with switches at operator station

Plumbing:

• 8″ piping c/w 8″ oil & gas loop hose
• Filtration System:
• Dual high efficiency cyclones mounted on D/S of unit with 20″ diameter drop box assembly with side swing cleanout doors
• 3″ brass drain valves and aluminum camlok fittings.
• Two 20″ diameter washable inline S.S./fiber filter element, 20 micron rating for protection of blower.

Silencers:

• One 12″ exhaust silencer, One 12″ cooling intake silencers in horizontal mount configuration

Hydraulic System (Linde-closed loop design):

• 8 Bolt PTO
• Hydraulic pump and motor for wash pump
• Tandem gear pump for boom and auxiliary functions
• Spool type valve control for pump and allied functions
• Rear control bank for rear gate
• 90 gallon oil tank c/w vent, site glass, filters, temperature gauge, and inspection hatch
• 12 volt oil coolers
• 3 stage hydraulic hoist cylinder

Hydraulic Boom:

• One New Style 8″ x 270 deg. telescopic suction boom mounted top rear of tank
• 8″ boom hose
• One wireless remote control, functions include on/off for wash pump
• Standard hard wire pendant control and plug (for back up)

Wash System:

• Cat 3560 Triplex plunger pump rated 20gpm@ 4000 psi
• 2″ Y strainer, 1″ high pressure Baird relief valve,
• Three Hydraulic Rewind Reels
• 100′ x 1/2″ pressure hose
• 100′ x 3/8 temperature rated Steam hose
• Degreaser assembly c/w trigger gun, wand, nozzle, pump, degreaser hose

Wash Accessories:

• One wash gun, wand, nozzle and quick coupler
• One steam wand, nozzle and quick coupler
• One 6′ hydro exposing wand c/w 4′ extension, high pressure ball
• Valve and turbo nozzle

Hot Water System:

• Hotshot 980,000 BTU/hr. heater c/e relief valves, temperature gauge Honeywell control and Diagnostic panel
• Safety Feature: a 340 deg. Auto Shut-Off for heater system
• New style 18 GPM solid brass flow switch with no bypass line
• 3000 Watt Inverter
• Wet Steam kit plumbed with high pressure ball valves

Wash Cabinet:

• Milron 54″ aluminum insulated cabinet c/w large door D/S
•  Small access door in large door P/S for hose access

Frame, Deck And Allied Equipment:

• Full length sub frame c/w 1/8″ checker plate hose tray/fender assembly
• c/w heavy duty outrigger supports, 1-1/4″ tube handrails, close in plate.
• Standard rear bumper with light boxes and rear tire skirt
• Sub frame supports decking, rear hoist hinges front hoist cradle

Cabinets:

• One steel three door deck box
• Two rear skirt fitting boxes

Electrical System:

• Waterproof main circuit control box – self contained power supply.
• Sealed wire harness c/w waterproof junction boxes.
• L.E.D. lamps (Clearance, park, signal).
• Sealed L.E.D. reverse lamps.
• Four L.E.D. work lights
• Three L.E.D.; lights on boom
• Electrical system shut-down at key.
• Sealed rear skirt lamp modules.
• Stop and turn L.E.D sealed lamp modules on top ring of door.
• Back up alarm.
• Deck mount blower control switch

Other Items:

• Catwalk & back rail (with safety tie off rings), on upper suction pipe driver’s side.
• PTO Hour meter installed in truck cab
• Chain hanger, slide out style
• Mud flaps
• 50′ ground cable ( wind up style )
• 30# fire extinguisher/Brkt/Cover
• Boom hose holders P/S
• One 8″ x 6″ x 4′ aluminum adapter/Band clamp ends
• Two 6″ x 6′ Aluminum dig tubes/band clamp ends, One with neoprene tip
• Dig tube holder

Other Items:

• Operators manual
• National Safety Mark
• One Year Standard Manufactures Ltd Warranty

Paint:

• The entire tank and body of vacuum system shall be sandblasted, primed and
• painted with Endura paint

Installation:

• Complete system installed on Tri-drive truck chassis